<МЕТА> - Украина | Блоги | Українська
<META> - Украина
Интернет
Реестр
Новости
Рефераты
Товары
Блоги
искать в блоге uwaismaldonado искать в постах/комментариях пользователя
Авторизация
Логин:
Пароль:
 
#

Календарь

 Октябрь 
Пн
Вт
Ср
Чт
Пт
Сб
Вс
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#

Die Casting - Advantages and Disadvantages

uwaismaldonado | 2018-07-25 21:02:28  
Сообщение прочтено 1927 раз

Die casting can be a process in which molten metal has under underhand into mold cavities. The metal hardens to acquire a desired shape. In recent years, plastic molded parts have replaced die-casting, because they are cheaper and lighter than die cast parts. Die-casting is possible employing a cold chamber or hot chamber process.
About Die Casting Process. Die casting can be a widespread non-expendable technique through which metal have in to the mold cavity under high pressure. Die casting mold that are referred to as dies may be used repeatedly to generate castings in a variety of sizes, shapes and wall thickness. The mold cavities are made with intricate designs that enables in producing complex shapes with accuracy, surface finish and attractiveness..
History of Die Casting. In the old times of die casting only low-pressure injection method was used, currently high-pressure casting techniques like squeeze casting and semi-solid die casting methods are use to cast over 4500 pounds per square inch. Initially, only tin and lead were die caste, however magnesium, copper and also other alloys will also be to cast applying this highly popular process.

Die Casting Process. With this process molten metal or any other materials have no choice but, under questionable into the cavities in the steel mold. Dies are a couple of part molds which might be made of alloy tool steel - The fixer die half as well as the ejector die half. The die or mold is fabricated believing with the component that is usually to cast. You can find four forms of dies:
Single cavity to generate one component
Multiple cavity to produce a amount of identical parts
Unit die to create various parts in the past
Combinations die to create a number of different parts with an assembly
The molten metal is injected into the die under questionable and speed, that helps in producing a casting that's smooth and precise because original mold. Pressure to succeed is maintained for the mold before the hot metal solidifies. In the event the metal is hardened, the die is opened to get rid of the casting.
For more info about Zinc Die casting check our site.

Поиск:
ИнформацияОбщениеБизнесДосуг
добавить сайт | реклама на портале | контекстная реклама | контакты Copyright © 1998-2010 <META> Все права защищены